Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
![background image](/ford/contour/l4-122_2.0l_cng_dohc_vin_z_sfi/Page-446069.png)
5.
Transfer outlet fitting from old tank valve to tank valve on replacement fuel tank. Tighten to 23 Nm (17 lb/ft). Refer to Figure 16.
6.
Lubricate O-ring with clean engine oil, then install new check valve. Tighten to 23 Nm (17 lb/ft). See Figure 16.
7.
Install PRD line to PRD. Tighten to 23 Nm (17 lb/ft). Position line as shown in Figure 17.