Contour L4-122 2.0L CNG DOHC VIN Z SFI (1996)
Front Crankshaft Seal: Service and Repair
Ford does not provide camshaft gear timing marks, or information to perform timing belt service without the special tools shown in the
timing belt service and repair procedure. See: Timing Components/Timing Belt
REMOVAL
1. Remove timing belt.
2. Using seal remover T92C-6700-CH, or equivalent, remove crankshaft front seal from oil pump.
3. Clean and inspect oil pump crankshaft front seal bore.
INSTALLATION
1. Lubricate oil pump crankshaft front oil seal bore and crankshaft front seal with engine assembly lubricant D9AZ-19579-D, or equivalent.
2. Using oil pump seal replacer T81P-6700-A, or equivalent, install crankshaft front seal into oil pump.
3. Install crankshaft timing sprocket, then timing belt.
