Contour L4-122 2.0L DOHC VIN 3 SFI (1995)
Control Arm: Service and Repair
Forward Arm
1. Raise and support vehicle, then remove wheel.
2. Disconnect stabilizer bar end at forward suspension arm, then remove bolt and nut securing arm to rear wheel spindle.
3. Position suitable jack beneath subframe, then lower subframe until forward arm and bushing to crossmember bolt will clear fuel tank.
4. Remove forward arm from vehicle.
5. Reverse procedure to install. When installing forward arm and bushing to crossmember bolt and nut, ensure bolt head faces fuel tank. Tighten bolt
and nut snugly, but do not final tighten until vehicle weight is resting upon rear wheels.