Contour V6-153 2.5L DOHC (1996)
9. Disconnect vacuum hose harness from heater control.
INSTALLATION
1. Connect wire connector(s) and vacuum hose harness to heater control.
2. Position heater control in instrument panel and install retaining screws.
3. Connect dash dimmer switch wiring connector.
4. Connect wiring connectors and antenna cable to radio chassis.
5. Slide radio chassis into instrument panel, making sure that radio chassis or rear radio chassis support of the digital audio compact disc player is
engaged on the upper support rail.
6. Push radio chassis or digital audio compact disc player inward until retaining clips are fully engaged.
7. Connect battery ground cable.
8. Test radio chassis and digital audio compact disc player for operation.