Contour V6-153 2.5L DOHC (1996)
3. Install direct clutch hub and shell on forward/coast/direct clutch cylinder, then slide reverse clutch drum assembly over direct clutch hub and shell.
4. Install reverse clutch hub and retaining ring, then invert assembly and install forward/coast/direct clutch cylinder hub seal on cylinder.
Coast Clutch Piston Seal Sizing
5. Use coast clutch piston seal sizer tool No. T94P-7700-D4 or equivalent to size forward/coast/direct clutch cylinder hub seal. Leave tool in place
until cylinder is installed in transaxle case.
Forward/Coast/Direct Clutches
DISASSEMBLE