ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

With Conventional Instrument Cluster|Page 9431 > < Audible Warning Device Control Module|Locations|Page 9426
Page 1
background image

Charge Lamp/Indicator: Description and Operation
With Conventional Instrument Cluster

Charge indication system consists of the following:

-

battery voltage gauge

-

generator voltage regulator

-

charging system warning indicator

-

necessary circuitry

Battery Voltage Gauge

NOTE:  The fuel gauge, battery voltage gauge and low fuel level warning switch are calibrated together; therefore, these components must all be
replaced when replacing ANY one of the components.

Battery voltage gauge is a part of fuel gauge assembly.

The battery voltage gauge:
-

indicates battery voltage when the ignition switch is in RUN (engine off).

-

registers within the band during vehicle operation.

-

is not adjustable and should be replaced if inoperative.

Charging System Warning
A red charging system warning indicator is located in the instrument cluster. This indicator glows when there is no generator output or when the
generator voltage is excessively high.

If the system is working normally, the following conditions will be present:
-

With ignition switch OFF, charging system indicator symbol is off.

-

With ignition switch in RUN (engine off), charging system indicator is on.

-

With ignition switch in RUN (engine running), charging system indicator is off.

With Conventional Instrument Cluster|Page 9431 > < Audible Warning Device Control Module|Locations|Page 9426