Crown Victoria V8-281 4.6L SFI (1998)
Alignment: Service and Repair
Caster and Camber
DESCRIPTION
Camber is the amount the centerline of the wheel is tilted inward or outward from the true vertical. If a wheel tilts outward away from the vehicle,
camber is positive. If the top of a wheel tilts inward toward the vehicle, camber is negative. For correct camber angles, refer to Specifications.
The caster is the forward or rearward tilt of the top of the front wheel spindle. If the top of the front wheel spindle tilts to the rear, caster is
positive. If the top of the front wheel spindle tilts to the front, caster is negative. For correct caster angle or tilt, refer to Specifications.
PROCEDURE
NOTE: Adjusting cams are provided for caster and camber adjustment.
1. Check caster and camber and record the readings.
