Crown Victoria V8-281 4.6L SOHC (1992)
5.
When the main control is removed for service, check the large valve body reinforcing plate. If it is the original plate (0.140" (3.5 mm) thick and no
I.D. notch on the edge) install a main control reinforcing plate service kit (F4AZ-7F282-A) (Figures 3 and 4) and perform normal repair
procedures. Refer to the following for kit contents.
The service kit (F4AZ-7F282-A) includes the following:
^
One (1) Valve Body Reinforcing Plate
^
Four (4) Bolts M6-1.0x18 mm
^
One (1) Instruction Sheet # 6782
Parts Block
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 503000, 504000