Crown Victoria V8-351 5.8L VIN G 2-bbl HP (1988)
Parking Brake Cable: Service and Repair
Intermediate
Removal
1. Raise vehicle on a hoist.
2. Loosen the cable adjusting nut.
3. Disconnect parking brake release spring at frame.
4. Disconnect the cable from the cable connectors, and remove it from vehicle.
Installation
1. Attach the intermediate cable to the front and rear cable connectors. Ensure rearward end of cable goes through release spring before attaching
cable to the connector.
2. Attach the release spring to frame.
3. Adjust parking brake.
4. Lower vehicle.