Crown Victoria V8-4.6L (2009)
Body / Frame Mount Bushing: Description and Operation
Frame and Body Mounting
The frame is bolted to the body and is used to:
-
aid in structural support.
-
provide mounting surfaces for the rear of the front suspension control arms.
-
support the radiator.
-
provide a mounting point for the front stabilizer bar.
-
provide a mounting point for the No. 2 and No. 3 crossmembers.
The front No. 2 crossmember is bolted to the frame and is used to:
-
aid in structural support.
-
provide mounting surfaces for the front suspension control arms.
-
provide a mounting point for the engine mounts.
The No. 3 crossmember is bolted to the frame and is used to:
-
aid in structural support.
-
provide mounting surfaces for the rear transmission support insulator.
For body misalignment and checking, refer to Body. Before welding is carried out on the vehicle, refer to Welding. For frame repair, refer to Frame.
See: Description and Operation/Body See: