Crown Victoria V8-4.6L (2009)
7. Remove the suction accumulator.
8. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury. See: Accessories
and Optional Equipment/Fire Suppression System/Service and Repair/Procedures
To install, reverse the removal procedure.
-
Install new O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
9. Evacuate, leak test and charge the refrigerant system.