Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Cruise Control Switch: Service and Repair
REMOVAL
1. Remove the steering wheel.
2. Remove the steering wheel cover screws.
3. Remove the steering wheel cover.
1
Position the steering wheel cover aside.
2
Disconnect the electrical connector and wire harness from the steering wheel cover.
3
Remove the steering wheel cover.
4. Remove the speed control actuator switches.
1
Push the speed control actuator switches out towards the face of the steering wheel.
2
Position the speed control actuator switches through the steering wheel openings and remove.
INSTALLATION
1. To install, reverse the removal procedure.
