Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Evaporator Case: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Recover the refrigerant.
3. Drain the radiator so that the coolant level is below the heater core.
4. Raise the vehicle.
5. Remove the RH front wheel and tire.
6. Remove the screws from the RH fender apron and remove the fender apron.
7. Remove the nuts.
8. Lower the vehicle.
9. Remove the blower motor switch resistor.
10. Disconnect the connector.
