Crown Victoria V8-4.6L CNG SOHC VIN 9 (1999)
Wiper Control Module: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
2. Remove the tunnel brace trim cover.
1
Remove pin-type retainers.
2
Remove the tunnel brace trim cover.
3. Position the instrument panel ash receptacle aside.
1
Remove the screws.
2
Position the instrument panel ash receptacle aside.
4. Remove the instrument panel ash receptacle assembly.
1
Disconnect the electrical connector.
2
Remove the instrument panel ash receptacle.