Crown Victoria V8-4.6L Flex Fuel (2008)
W5-W7
Test X: The Decklid Flashing Lamps Do Not Operate Correctly
PINPOINT TEST X: THE DECKLID FLASHING LAMPS DO NOT OPERATE CORRECTLY
Normal Operation
The rear flasher relay (switched side) is supplied voltage from the battery junction box (BJB) through circuit 1271 (VT). Voltage is provided to the
rear flasher relay coil through circuit 705 (LG/OG). Ground for the rear flasher relay coil is provided through circuit 486 (BN/WH) to the decklid ajar
switch when the decklid is open. When the rear flasher relay is energized, voltage is routed to the rear flasher through circuit 383 (RD/WH). The rear
flasher in turn, alternates voltage to the LH and RH flasher lamps through circuits 1 (DB) and 2 (WH/LB), respectively.
This pinpoint test is intended to diagnose the following:
-
Fuse
-
Wiring, terminals or connectors
