Crown Victoria V8-4.6L Flex Fuel (2008)
Console: Service and Repair
Console - Floor
CONSOLE - FLOOR
Removal and Installation
1. Remove the floor console finish panel.
2. Remove the floor console storage bin and disconnect the power point electrical connector.
3. Release and disconnect the electrical connector from the transmission selector lever assembly.
4. Remove the 4 bolts and position the transmission range selector lever assembly aside.
-
To install, tighten to 12 Nm (9 lb-ft).
5. Remove the 2 floor console bolts.
-
To install, tighten to 8 Nm (71 lb-in).
6. NOTE: Slide the floor console rearward to remove.
Position the transmission selector lever assembly aside and remove the floor console.
7. To install, reverse the removal procedure.
