Crown Victoria V8-4.6L Flex Fuel (2008)
11. Disconnect the seat position sensor electrical connector
Power seat tracks
12. Remove the 2 recliner-to-seat track bolts.
-
To install, tighten to 52 Nm (38 lb-ft).
Manual seat tracks
13. Remove the 2 recliner-to-seat track bolts.
-
To install, tighten to 55 Nm (41 lb-ft).
All seat tracks
14. Remove the pivot bolt.
-
To install, tighten to 45 Nm (33 lb-ft).
15. Remove the seat track.
-
Disconnect any electrical connectors still attached.
-
Remove the 4 seat track-to-cushion frame bolts and seat track.
-
To install, tighten to 20 Nm (15 lb-ft).
16. To install, reverse the removal procedure.
17. Install the affected seat
18. Repower the SRS.
