Crown Victoria V8-4.6L Flex Fuel (2008)
5. Apply the parking brake control fully.
6. Push upward on the parking brake adjuster clip to lock the adjuster.
7. Using the parking brake release handle, release the parking brake control.
8. Disconnect the front parking brake cable and conduit from the cable union.
9. Unclip the scuff plate, the cowl side trim panel and remove.
10. Disconnect the parking brake release handle cable from the parking brake control.
11. Remove the screws and the instrument panel steering column cover with the parking brake release handle.
12. Remove the 5 instrument panel steering column opening cover reinforcement bolts and the reinforcement.
^
To install, tighten to 4 Nm (35 inch lbs.).