Crown Victoria V8-4.6L Flex Fuel (2008)
9. Position the brake disc onto the hub.
10. Position the brake caliper and brake pads onto the anchor plate and install the 2 brake caliper guide pin bolts.
^
Tighten to 25 Nm (18 ft. lbs.)
11. Test the parking brake for normal operation.
12. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.
13. If equipped, turn the air suspension service switch to the ON position.
