Crown Victoria V8-4.6L Flex Fuel (2008)
5. Remove the RH and LH lower engine mount nuts.
^
To install, tighten to 90 Nm (66 ft. lbs.).
6. Using the special tool, raise the engine.
7. Remove the 3 RH engine mount bolts.
^
To install, tighten to 70 Nm (52 ft. lbs.).
8. Remove the RH engine mount.
9. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
To install, reverse the removal procedure. If equipped with fire suppression system, repower the system.