Crown Victoria V8-4.6L Flex Fuel (2008)
31. Disconnect the driver seat side air bag module electrical connector, located at the lower rear of the seat cushion pan.
32. Attach restraint system diagnostic tool to the seat harness side of the driver seat side air bag module electrical connector.
All vehicles
33. Install the RCM fuse 22 (10A) to the CJB.
34. Connect the battery ground cable.
Reactivation
All vehicles
1. Remove the RCM fuse 22 (10A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.
Vehicles with side air bags
3. Remove the restraint system diagnostic tool from the driver seat side air bag electrical connector.
