Crown Victoria V8-4.6L Flex Fuel (2008)
Hazard Flasher Relay: Locations
Hazard Flasher Relay is replaced by the Multifunction switch.
See: Sensors and Switches - Lighting and Horns/Turn Signal Switch
Multifunction Switch Locations
Description and Operation
Module Controlled Functions
The vehicle is equipped with the following multifunction modules:
^
Lighting control module (LCM)
Lighting Control Module (LCM)
The LCM monitors the inputs and provides outputs and diagnostic information for the following multiple vehicle systems, including the:
^
Brake shift interlock
^
Exterior lighting
^
Interior lighting
^
Perimeter alarm
The LCM receives a voltage input from the brake pedal position switch and provides power to the brake shift interlock solenoid. For the exterior
lighting, it receives inputs and provides outputs to control the exterior, interior (including the cluster and panel illumination) lighting systems on the
vehicle. The perimeter alarm is controlled by the LCM, which receives inputs from the perimeter alarm switches and arms the alarm when
commanded.
See: Diagrams/Connector Views See C 202A,B and C
Connector View
See: Diagrams/Electrical Diagrams Diagram By Number
Electrical Diagram
Initial Inspection and Diagnostic Overview.
DIAGNOSIS AND TESTING
See: Lamp Control Module
Lighting Control Module (LCM) Service and Repair