Crown Victoria V8-4.6L Flex Fuel (2008)
Evaporative Canister Filter: Service and Repair
DUST SEPARATOR
Removal and Installation
1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire
Suppression System. Failure to follow the instructions may result in serious personal injury.
Remove the evaporative emission (EVAP) canister.
2. Disconnect the vent tube from the dust separator.
3. Depress the lock tab and release the dust separator from the EVAP canister bracket.
4. Disconnect the EVAP canister vapor tube and remove the dust separator.
5. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
