Crown Victoria V8-4.6L Flex Fuel (2008)
Part 2
Removal and Installation
1. Disconnect the evaporative emission (EVAP) canister purge valve electrical connector.
2. Disconnect the 2 fuel vapor tube-to-EVAP canister purge valve quick connect couplings.
3. Remove the EVAP canister purge valve.
-
Depress the lock tab on the EVAP canister purge valve and release it from the bracket.
4. To install, reverse the removal procedure.
-
Carry out the Evaporative Emission System Leak Test. See: Testing and Inspection
-
Carry out the evaporative emission repair verification drive cycle.