Crown Victoria V8-4.6L Flex Fuel (2008)
7. NOTE:
-
Inspect the surfaces of the FP module flange and fuel tank seal contact surfaces. Do not polish or adjust the seal contact area of the FP module
flange or fuel tank. Install a new FP module or fuel tank if the seal contact area is bent, scratched or corroded.
-
Install a new FP module seal.
To install, reverse the removal procedure.
8. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.