Crown Victoria V8-4.6L Flex Fuel (2008)
7. Disconnect the power point electrical connector and remove the storage compartment.
8. Detach the retaining clips and remove the floor console finish panel.
All vehicles
9. Remove the 2 RCM bolts on the RH side.
10. Disconnect the large RCM electrical connector.
1
Pinch the thumb tab and pivot the connector position assurance lever all the way back until it stops.
2
Pull out and disconnect the RCM electrical connector.
11. Disconnect the small RCM electrical connector.
12. Remove the RCM bolt on the LH side and the RCM.
Installation