Crown Victoria V8-4.6L Flex Fuel (2008)
3. Position the surface gauge on the same flat, level surface as used in Step 1 and adjust the gauge's arm until the scriber point is located in the center
of the shock absorber mounting bolt.
^
Lock the surface gauge in this position.
4. With the surface gauge positioned on a flat, level surface, record the measurement of the surface gauge position (measurement B).
5. Subtract measurement A from measurement B to obtain the front ride height.
^
Refer to Specifications.
6. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
If equipped with fire suppression system, repower the system.
Rear Ride Height Measurement