Crown Victoria V8-4.6L Flex Fuel (2008)
Power Steering Fluid Reservoir: Service and Repair
Power Steering Fluid Reservoir
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. Using a suitable suction device, remove the power steering fluid from the reservoir.
2. Release the clamps and disconnect the power steering pump supply hose and the return hose.
3. Remove the bolt and the power steering fluid reservoir.
^
To install, tighten to 12 Nm (9 lb-ft).
4. To install, reverse the removal procedure.
5. Fill the power steering system.
