Crown Victoria V8-4.6L Flex Fuel (2008)
21. Install the generator.
22. Position the radiator sight shield and install the 3 pin-type retainers.
23. Raise and support the vehicle.
24. Install the 2 engine mount nuts.
-
Tighten to 90 Nm (66 lb-ft).
25. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and
procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury.
26. Check the front end alignment and adjust as necessary.
