Crown Victoria V8-4.6L Flex Fuel (2008)
^
When installing a new air spring, care must be taken not to apply a load to the suspension until the springs have been inflated using the air spring
fill procedure.
^
After inflating an air spring in the hanging position, it must be inspected for correct shape.
CAUTION: Prior to installing an air spring, make sure the air spring is in the correct shape with no folds or creases. If the air spring is not
in the correct shape, carry out air spring refold before installing the air spring, to prevent air spring damage.
1. CAUTION: Do not clamp any portion of air spring piston or damage to the air spring may occur.
Place the air spring on a flat surface.
2. Remove the air spring solenoid to expand the collapsed air bag.
3. Push the membrane down over the piston to the correct height.
4. Install the air spring solenoid to help maintain the correct height.
