Crown Victoria V8-4.6L Flex Fuel (2008)
1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire
Suppression System. Failure to follow the instructions may result in serious personal injury.
Remove the shock absorber and spring assembly.
2. CAUTION: Overtightening the vise may damage the shock absorber tube.
Mount and mark the shock absorber and spring assembly.
1. Position the shock absorber and spring assembly in a suitable holding device.
2. Mark the upper mounting bracket, spring and shock absorber for assembly reference.
3. NOTE: If installing a new spring, make sure the part number is correct. Refer to the vehicle certification (VC) label for the correct spring code.
Compress the spring.
1. Install an appropriate spring compressor.
2. Compress the spring.
4. While holding the shock absorber rod, remove and discard the nut.
5. Remove the mounting bracket and dust boot as an assembly.
