Crown Victoria V8-4.6L Flex Fuel (2008)
Axle Shaft Assembly: Service and Repair
Axle Shaft
Removal
1. WARNING: If equipped with fire suppression system, refer to Fire Suppression System for Important Safety Warnings. Failure to follow
this instruction may result in serious personal injury.
NOTE: When removing the rear brake caliper in this procedure, it is not necessary to disconnect the hydraulic lines.
Remove the rear brake caliper and the brake disc.
^
Support the rear brake caliper with mechanic's wire.
2. Position the rear brake anti-lock sensor aside.
1. Remove the bolt.
2. Remove the sensor and position it aside.