Crown Victoria V8-4.6L SOHC VIN 6 (1996)
3. Position front door power window regulator minus motor using upper front door power window regulator studs and tabs on window regulator
electric drive mounting bracket.
4. Install rivets retaining front door power window regulator minus motor to door inner panel (1/4-20 x 1/2 inch screw and 1/4-20 nut and washer
assemblies or equivalent metric fasteners may be used as alternates).
5. Install two upper front door power window regulator retaining nuts.
6. Install front door window glass.
7. Adjust front door window glass.
8. Install front door trim shield and front door trim panel. See:
