Crown Victoria V8-4.6L SOHC VIN 6 (1996)
1. Start cable through opening in the dash panel inside passenger compartment.
2. Connect end of cable to parking brake control take up reel. Press tabbed conduit retainer into parking brake control. Install sound deadener cover
patch at dash panel.
3. Raise vehicle. Insert cable through frame member toward rear of vehicle. Press tabbed conduit retainer into frame hole.
4. Connect control cable to rear cable connector on LH side frame rail.
5. Remove fabricated tool used to retain take up reel with pliers.
6. Lower vehicle.
7. Check operation of parking brake as outlined under Adjustments.