Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Radiator Cooling Fan Motor: Service and Repair
1. Disconnect battery ground cable.
2. Disconnect cooling fan motor wiring connector at side of fan shroud.
3. Remove fan shroud.
4. Remove radiator upper sight shield.
5. Loosen fan shroud from radiator mounting and remove lower radiator hose from supports on fan shroud.
6. Lift shroud out of vehicle.
7. Remove cooling fan motor assembly from fan shroud.
8. Reverse procedure to install. Torque cooling fan motor mounting screws to 27-53 in lb. Torque fan shroud retaining screws to 24-48 in lb.
