Crown Victoria V8-4.6L SOHC VIN 6 (1996)
2.
Locate the area on the intake manifold where the part number is to be found. See Figure 1.
3.
NOTE: Thorough cleaning of the area is required in order to accurately read the part number prefix and suffix. Wrap a shop towel around the end
of either a long screwdriver or long extension to reach the affected area to wipe after spraying with cleaner.
Clean the area between the two (2) runners by first blowing any dirt or foreign material away using compressed air. Then spray the area with
Motorcraft Metal Brake Parts Cleaner, PM-4 or equivalent, and using a shop towel, wipe the area clean.
4.
Read and record the intake manifold part number.
^
If the part number on the manifold matches the part numbers listed, the vehicle is not eligible for a refund without a receipt.
