Crown Victoria V8-4.6L SOHC VIN 6 (1996)
^
^
FAX Number
When contacting the Parts Support Center via phone FAX or E-mail for a question or concern please provide:
^
Dealer Name and P & A code
^
Contact Name
^
Phone number and E-mail address
^
FSA # : Customer Satisfaction Program 05N04
^
Include a VIN #
^
Part number that you have a question / concern with
DEALER PRICE
For latest prices refer to DOES II.
PARTS RETENTION AND RETURN
Affected intake manifolds are subject to random selection for return to the Ford Warranty Parts Analysis Center (WPAC). Refer to your daily PEARS
(Parts Entry and Return System) register for part disposition and return instructions.
Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures."
Attachment III - Technical Information
OVERVIEW
This program involves either:
A)
inspecting the intake manifold part number to determine if the owner is eligible for reimbursement for a previous intake manifold
replacement repair without a receipt, or
B)
inspecting the intake manifold coolant crossover directly behind the alternator for leakage in the event the owner reports a suspected coolant
leak. If a leak in this specific area is verified, the intake manifold must be replaced.
Proceed to the appropriate inspection procedure.
PART NUMBER INSPECTION
NOTE:
The part number is molded into the intake manifold and is located between two (2) runners on the driver side of the manifold. No disassembly is
required to view the part number except for removal of the engine appearance cover, if equipped.
^
On most affected vehicles, the throttle body points toward the driver side of the vehicle. The part number will be found on the driver side of the
manifold, beneath the throttle body intake tube.
^
On applications where the throttle body is pointing toward the right side of the vehicle, the part number is still located on the driver side of the
manifold.
1.
Remove the engine appearance cover, if equipped.
