Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Removal
1. Remove the heater air plenum chamber from the vehicle as outlined.
2. Reach through the demister nozzle and duct opening and remove the sleeve nut attaching the vacuum motor arm to the heater air damper door.
3. Remove two screws attaching the vacuum control motor to the mounting bracket.
4. Disengage the vacuum control motor from the heater air plenum chamber and disconnect the vacuum hose from the vacuum control motor.
Installation
1. Position the vacuum control motor to the mounting bracket and the heater air damper door bracket.
2. Install two screws to attach the vacuum control motor to the mounting bracket.
3. Connect the vacuum motor arm to the heater air damper door with a new sleeve nut.
4. Connect the vacuum hose to the vacuum control motor.
5. Install the heater air plenum chamber in the vehicle as outlined.
6. Check the system for proper operation.
