Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Lighting Control Module (LCM) PID Index
Manufacturer's Scan Tool (New Generation Star Tester)
Data Link Diagnostics
NOTE: The ignition switch must be in RUN position or test will fail. This test is used to verify the proper operation of communication circuit of each
module on the multiplex communication network or diagnostic communication network or diagnostic communication network.
1. Perform New Generation Star Tester Hookup and Vehicle Selection as outlined.
2. Rotate dial to menu item "Diagnostic Data Link" and press trigger.
3. If results of circuit 914 (+) = 0000 and circuit 915 (-) = 0000, then the Multiplex Communication Network link test passed. If non-zeros returned,
then go to Network Diagnostic Trouble Code (DTC) Index.