Crown Victoria V8-4.6L SOHC VIN 6 (1996)
1. Perform New Generation Star Tester Hookup and Vehicle Selection as outlined.
NOTE: The ignition switch must be in RUN position or test will fail.
2. Rotate dial to menu item Diagnostic Data Link and press trigger.
3. Select module to test by rotating dial to highlight module and press trigger.
4. Menu item Diagnostic Test Modes is highlighted. Press trigger.
5. Rotate dial to menu item Retrieve/Clear Continuous DTC, press trigger, then press start (Button 3).
6. Clear individual DTC from selected module, highlight DTC by rotating dial then press Button 8.
7. Clear all DTCs from selected module, press Button 7.
Without Scan Tool
NOTE: Ford DOES NOT provide a procedure to retrieve or clear DTCs other than with the method described in Clearing Trouble Codes / With Scan
Tool. See: Courtesy Lamp/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Courtesy Lamps/Clearing Trouble Codes/With Scan
Tool
