Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Headlamp Switch: Service and Repair
Headlamp Switch
Removal and Installation
1. Disconnect battery ground cable (14301).
2. Remove light switch knob (11666) from headlamp switch (11654) by grasping knob and pulling out.
3. Remove instrument panel finish panel (044D70) from instrument panel (04320).
4. Disconnect main wiring (14401) connector from headlamp switch.
5. Remove nut retaining headlamp switch to headlamp switch bracket (11A668) and remove switch.
6. To install, reverse Removal procedure. Tighten switch retaining nut to 3 Nm (26 lb-in.).