Crown Victoria V8-4.6L SOHC VIN 6 (1996)
9.
Install new MAF sensor on air cleaner cover. Tighten screws to 4.7-5.0 Nm (42-44 lb/in).
10.
Install air cleaner cover.
11.
Tighten clamp retaining MAF sensor to clean air tube.
12.
Connect IAT sensor electrical connector.
13.
Connect MAF sensor electrical connector.
AUTHORIZED MODIFICATIONS LABEL
^
Obtain, prepare and attach the Authorized Modifications Label. Write in the modification description, your P & A Code, the change authorization
and date of repair as shown below.
^
Provide California and Massachusetts owners with "Emissions Recall Proof of Corrections" Certificates.
