Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Information Bus: Reading and Clearing Diagnostic Trouble Codes
1. Perform New Generation Star Te8ter Hookup and Vehicle Selection.
NOTE: The ignition switch must be in RUN position or test will fail.
2. Rotate dial to menu item Diagnostic Data Link and press trigger.
3. Select module to test by rotating dial to highlight module and press trigger.
4. Menu item Diagnostic Test Modes is highlighted. Press trigger.
5. Rotate dial to menu item Retrieve/Clear Continuous DTC, press trigger, then press start (Button 3).
6. Clear individual DTC from selected module, highlight DTC by rotating dial then press Button 8.
7. Clear all DTCs from selected module, press Button 7.
