Crown Victoria V8-4.6L SOHC VIN 6 (1996)
On 1998 to 2002 model year vehicles, install one (1) tie strap on each shield to secure it to the shock absorber lower mount bracket as illustrated.
If necessary, use pliers and LIGHT force to engage the locking feature of the tie strap. DO NOT STRETCH THE TIE STRAP
UNNECESSARILY. See Figure 3.
4.
On 1992 to 1997 model year vehicles, install the supplied convolute over the ABS circuit wiring leading to each rear wheel. Position the convolute
so it is up against the grommet as shown in the illustration. Secure with vinyl tape. See Figure 4.
5.
CAUTION: Do not loosen or remove more than three (3) differential cover bolts at any one time or a leak may develop.
NOTE: If the axle identification tag (all affected model year vehicles) and/or fluid identification tag (2002 to 2003 model year vehicles only)
interferes with the installation of the differential cover shield, relocate the tag(s) as necessary to another bolt location on the cover. In some
instances, the tag may simply need to be rotated to avoid interference with the shield installation.
