Crown Victoria V8-4.6L SOHC VIN 6 (1996)
EGR Tube: Service and Repair
EGR Valve Installation
REMOVAL
1. Remove air cleaner outlet tube.
2. Raise vehicle onto hoist.
CAUTION: Use care not to damage Exhaust Gas Recirculation (EGR) valve tube to manifold connector.
NOTE: Hold EGR valve tube to manifold connector with a wrench while disconnecting EGR valve to exhaust manifold tube.
2. Disconnect EGR valve to exhaust manifold tube from EGR valve and EGR valve tube to manifold connector.
3. Lower the vehicle.
4. Disconnect EGR backpressure transducer hoses from EGR valve to exhaust manifold tube.
5. Disconnect EGR differential pressure transducer hoses from EGR valve to exhaust manifold tube.
6. Remove EGR valve to exhaust manifold tube from the vehicle.
INSTALLATION
1. Position EGR valve to exhaust manifold tube into EGR valve and loosely connect EGR valve-to-exhaust manifold tube nut to EGR valve.
NOTE: Do not tighten EGR valve exhaust manifold tube nut on EGR valve at this time.
2. Connect EGR differential pressure transducer hoses to EGR valve to exhaust manifold tube.
3. Raise the vehicle.
NOTE: Hold EGR valve tube to manifold connector with a wrench while tightening EGR valve-to-exhaust manifold tube nut.
