Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Fuel Tube Coupling
3. Replace the missing or damaged O-rings. Use only the O-rings listed in the illustration. Lubricate the male fitting, the O-rings and the inside of the
female fitting with clean engine oil meeting Ford specification ESE-M2C39-F such as Motorcraft oil, or equivalent.
CAUTION: Use only the specified O-rings as they are made of a special material. The use of any O-rings other than the specified O-rings may
cause the connection to leak intermittently during vehicle operation.
4. Fit the female fitting to the male fitting and push until the garter spring snaps over the flared end of the female fitting.
Garter Spring
5. Ensure coupling engagement by pulling on the fitting and visually checking it to be sure the garter spring is over the flared end of the female
fitting.
NOTE: All vehicles require the large "black" clip to be installed on the supply side fuel line and the small "gray" clip to be installed on the return
side fuel line.
Fuel Tube Clip
