Crown Victoria V8-4.6L SOHC VIN 6 (1996)
1. Push fuel injection supply manifold down to make sure all fuel injector O-rings are fully seated in the fuel injection supply manifold cups and
intake manifold runner control assemblies.
2. Install retaining bolts while holding down fuel injection supply manifold. Tighten bolts to 8-12 Nm (71-106 lb in).
3. Install inlet and outlet fuel lines at spring lock coupling.
4. Connect vacuum line to fuel pressure regulator.
5. Connect fuel charging wiring to injectors.
6. Install air cleaner outlet tube. Tighten engine air cleaner tube clamps to 2.5-3.2 Nm (22-28 lb in).
7. Perform fuel charging post-service procedures. See: Service and Repair/Post-Service Procedures
