Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Technical Service Bulletin # 97T01
Date: 970601
Campaign - MIL Clarification For TSB 97-09-07
97T01
SPECIAL SERVICE INSTRUCTION
Malfunction Indicator Light - Clarifying Current TSB 97-09-07 (Previous Superseded Articles Are 96-20-04 and 96-17-08)
Dealer Letter
Announcement of New Service Action
Attachment I
^
Administrative Information
^
Labor Allowances
Attachment II
^
Technical Information
^
Special Service Instruction Flow Chart
^
TSB Article No.1 97-9-7
Customer Notification Letter not Applicable
Attachment I - Administrative/Labor Information
OASIS
You must use OASIS to determine it a vehicle is covered by this Special Service Instruction.
Promptly Correct (Within applicable emissions warranty time and mileage)
^
Affected vehicles at your dealership.
^
Other eligible vehicles which are brought to your dealership.
Claims
Enter claims using DWE. See ACESII Manual, Sections 5 & 6.
Labor Allowances
Operation Description
Labor Time
Labor Operation
Check Powertrain Control
0.2 Hrs.
SSI01A
Module Calibration Level and
Return Vehicle to Owner
Reprogram Powertrain Control
0.3 Hrs.
SSI01B
Module
Parts Ordering Information
No parts are required for this program.
Claims Preparation
-- Enter using DWE.
-- Use code information as shown:
^
Program Code - 97T01
^
Causal Component - RECALEM
^
Condition Code - 42
^
Labor Operation - See above
See Sections 5 & 6 of the ACESII manual for detailed instructions.
Attachment II - Technical/Special Service/TSB Article Info.
Refer to the decision making chart shown for specific instructions.
These Special Service Instructions are only for vehicles as part of applicable emissions warranty time and mileage coverage. If the vehicle is outside the
emissions warranty time and mileage limits, do not perform Special Service Instruction 97T01.
