Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Turn Signal Switch: Service and Repair
1.
Disable airbag system.
2.
Tilt column to lowest position and remove tilt lever, if equipped.
3.
Remove ignition lock cylinder.
4.
Remove shroud screws, then remove upper and lower shrouds.
5.
Remove two screws attaching multi-function switch to steering column casting. Disengage switch from casting.
6.
Disconnect two electrical connectors.
7.
Reverse procedure to install, noting the following:
a. Torque retaining screws to 18-26 in lb.
b. Activate airbag system.
