Crown Victoria V8-4.6L SOHC VIN 6 (1996)
Parts Requirements (only after measured for allowable movement)
Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels.
PART NUMBER
DESCRIPTION
QUANTITY
F5AZ-3590-A
Steering Gear Sector Shaft Arm
1.00
(Pitman Arm)
Parts Retention And Return Policy
You are to hold the take off recall parts until part disposition instructions are received, per Warranty and Policy Manual FPS-7755. Parts needlessly
replaced will be subject to chargeback.
Dealer Price
For latest prices, check or call your:
^
Order Processing Center
^
DOES II
^
Updated Price Book
Excess Stock Return
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy procedure Bulletin 4000.
Attachment III - Technical Information
PITMAN ARM SERVICE PROCEDURES
1.
Turn air suspension system off if equipped.
2.
Raise vehicle on a hoist. Make sure wheels are in the straight ahead position.
3.
Visually inspect the pitman arm ball joint seal for damage. If seal is torn or missing, replace the pitman arm. Refer to appropriate Service manual
for pitman arm replacement.
4.
Pull down the centerlink to take any play out of the pitman arm ball joint. See Figure 1.